My golf 6 tsi 1.2 won't start

I have this code and the oil pressure light it on as well. How can I fix this ? We use the car for traveling and I just want to take care of it well.

Bosch Polocup ecu, car idles correctly, able to do adaption and drives well but when i check dtc's I often get 65535 Internal Control Module Memory Error so i bought another one and took it to the same guy who did original one and he loaded the same map. I installed the ecu i bought and when i started it, perfect, cold start revs slightly higher and drove it untill warm,idle slightly higher but ok. Next day drove car,all fine. Start car that night and car won't idle,dtc throttle position sensor. Put my other ecu back in and all is fine still. Any ideas why this happened?

After covering my seats the airbag error code comes on and doesnt want to go away even after i took it for diagnose to clear error

Looking for guidance on a persistent issue with my 1.4 TSI that is causing fuel dilution in my engine oil and misfires.
Persistent High Pressure: ECU is commanding and holding ~140 bar at idle (Actual = Specified).
Fuel Dilution: Confirmed smell of petrol in engine oil.
​Misfires: misfires at idle , but runs smooth at high RPM (more than 1200)/load.

Here’s an improved version of your text with better clarity, structure, and grammar while keeping the details intact: Volkswagen Golf 7 (2016) 2.0 TDI Issue – Need Help Hi everyone, I have a 2016 Golf 7, 2.0 TDI, which I bought from South Korea via Autowini. The car arrived in Albania on June 25, 2024. Initially, it had no issues, except for one time in traffic when the start-stop system was on—it turned off and had to be restarted manually. I didn’t think much of it at the time. Shortly after, I changed the oil, filters, and timing belt. I hadn’t driven many miles at that point. First Iss… Read complete

Fan not turning, only turns when I remove the sensor that is connected on the radiator.

- I changed the thermostat
- traced the wires connected to thermostat sensor to computer box (works just fine)

Quand je passe la valise de diagnostic sa m affiche aucune communication de la prise obd au calculateur donc impossible de passer le Diag

Ecu not communicating with anything, wire harness issues and won’t pass emissions in Colorado engine runs though

Kommunikation mitTCU verloren das elektronische Steuermodul (ECU)hat einen Kommunikation Fehler mit dem getriebe steuermodul (TCM)erkannt

Error code with scan and small problem

Am schimbat ambele sonde Landa am schimbat debitmetru de aier am schimbat și catalizatorul și în fiecare săptămână îmi apare acesta eroare

After covering my seats the airbag error code comes on and doesnt want to go away even after i took it for diagnose to clear error

Hi,
I drive a 2006 Volkswagen Golf 1.9 TDI with around 220,000 km.

Recently, I noticed two issues:

1. A blowing or whistling sound when accelerating and decelerating, which seems to come from underneath the car, possibly around the exhaust line or turbo.
2. A metallic rattling or ticking noise, especially noticeable at low RPMs.
Both noises are more noticeable when the engine is cold, but sometimes persist when hot. I haven’t experienced any significant power loss, and nothing shows up on the diagnostic scan (OBD/valise).
Could this be due to a leak in the exhaust system, a loose or damaged hose, turbo issues, or maybe injectors or valve lifters?

Thanks in advance for your help or similar experiences!

Cam folower is broken and lost power the error code is p0191

P0171 on golf4 essence 115 ch

Transmission error light comes on and off intermittently. Connected to OBD, but could not catch codes. Codes do not show up in memory

Ecu komunikation key, immobilized, orangey system key

Ecu komunikation key, immobilized

I have my golf 8 since 2020 bought it new but recently it has been throwing some codes about an shifting lever and drive system malfunction , i have read online about those but all it says that i have an faulty ECU program , i thought so too because i took it to a shop to do an adBlue delete cuz the pump broke down and the dealership did not want to fix it .
I need help the car loses power when i am on highway speeds and i am scared to go long distance with it .
Any information helps ,Thank You : ).

AC not working, resistor been changed & still issues. When on the first speed setting it works fractionally, however does not recognise when you go up to 6.
Error code for AC was U103000
Error code for Central Electrics is B126301

Any help would be appreciated as it is really annoying now!