Sensors problems
Sensors: Electrical device that measures the different performance parameters of the car.
Read more
More specific problems:
Related problems:
See owner's manual
Top problems
Código de falha no sensor do acelerador
Mitsubishi Outlander 2008 2.4L AIRTREK 131000 miles
Quando acelero tudo, o carro perde aceleração e entra em modo segurança, acende a luz chek engine e dá o código de falha no sensor do acelerador, porém o sensor foi trocado e o problema se manteve e o código também, será ue é tbi?
1 report
Ignition Sensor Issue
Mitsubishi Outlander 2017 113000 miles
The sensor in my ignition is busted. The sensor reads the key is still inserted, when it's not, therefore I am unable to lock my car.
2 reports
Limp Mode Help 
Solved
Mitsubishi Outlander 2013 GX3 4n14 2.2 D-ID 112568 miles
The car went into limp mode on inspection of the odb reader, it showed 4 codes: P0219 & P0299 (2 live and 2 archived), this also threw up the ASC & 4x4 Requires Servicing. I cleared the codes, as the guy we bought it off didn't clear the codes after a turbo change...since clearing P0106 and P0107 have popped up, cleared them then limp mode again with P0106 & P0299...took off the Map & Maf censors cleaned reinstalled...odb computer is picking up wattage and live data from Map, Maf & Turbo but none from the EGR valve, whats the best things to check before removing the EGR valve (fuses etc) any help is much appreciated
2 replies
Best answer (according to MrGoodway)
MAP & MAF sensors were all checked and working, including EGR Valve and Throttle body it ended up being a blocked vacuum pipe and a tiny split in the same pipe towards the jubilee clip - garage recommended to book in for a manifold clean or replacement
We have a 2007 pajero that has had similar codes and we have cleaned and cleared maf, map & EGR already. Wich Vakuum pipe was the problem with yours?
CommentAsc off sign
Mitsubishi Outlander 2007 LS 150000 miles
The ASC OFF sign has turn on after I change the back lights of the car, the sensors have been checked but these are ok.
El error de ASC OFF se encendio despues de que cambie las luces traceras, los sensores se revisaron pero estan bien.
El error de ASC OFF se encendio despues de que cambie las luces traceras, los sensores se revisaron pero estan bien.
1
7 reports
Yeah man i got the same issue here i haev a 2009 model
Did you end up fixing it or did it just go away???
Did you end up fixing it or did it just go away???
CommentRadiator fan not turning on
Mitsubishi Outlander 2016 SUV 130000 miles
I recently had a radiator blowout.
I suspect that the radiator fan was the cause since it does not turn on on its own. I have tested both fan motors by using test jumpers & they both work fine. The next step I was told would be to test the fan relay & the core temperature sensor. Anyone has experience with the same problem & if there are other things I need to check?
Also, there are several fuses/relays in the fuze box that have the fan symbol. Can anyone help me Identify which one is for the radiator fan?
It would also be a bonus if anyone can tell me what the other fan fuzes are for.
I suspect that the radiator fan was the cause since it does not turn on on its own. I have tested both fan motors by using test jumpers & they both work fine. The next step I was told would be to test the fan relay & the core temperature sensor. Anyone has experience with the same problem & if there are other things I need to check?
Also, there are several fuses/relays in the fuze box that have the fan symbol. Can anyone help me Identify which one is for the radiator fan?
It would also be a bonus if anyone can tell me what the other fan fuzes are for.
1 report
Problems with a Outlander? Share them
Find what you needed?
Thank you!
