Problemi di Error code 67

12 segnalazioni

JUDI85 da Stati Uniti 11 anni fa

The error code 67 is an error between the comunication of the bodywork module and the steering column one. In the steering column module there is a device that reads the steering wheel's position and, when reading it inappropriately, the bodywork module determines that its state is not the right one to start, nullifying this function. The problem is within the column module, where a latch locks or breaks. In most of the cases, the problem can be solved by hitting softly the steering column module, located right under the column itself and to access it you simply need to remove the underlying plasic, which has four screws. Others say that, only by moving the direction, when pressing the start button again there will be no inconvenients. Good luck!

Miglior risposta (secondo Peter)

Peter da Stati Uniti 11 anni fa

If the noise when you open the door is longer than usual, you should take your car to some workshop because it is the steering column module that is failing.

Paul da Nigeria 6 anni fa

The steering module device can be fix without going to any workshop if only you have the time to figure it out... you need to know what the steering module is it under the your car steering area inside, just lose it out and clean up the old grease inside and check if the small motor inside is okay if yes just it will work for you and the error will be gone once you complete this process. Make sure that you grease the device back before mounting it back good luck

ryan da altro 2 anni fa

@Paulhi i just wanna ask on how to remove the steering column box? Thank You.

Cruze 2012 da altro un anno fa

Meu cruze LT eco tec 6 aut, ano 2012. Enquanto dirige ou parado ligado, ao virar o volante para ambos os lados el faz um barulho rangendo e estralando na frente. Parece que vem das torres dos amortecedores. Já troquei tudo na frente, menos amortecedores, pois o mecânico disse que estão bons. Mas o barulho permanece. Horrível!
Qual o suposto problema?

Commenta

Error code 67 cruze 2015

Chevrolet Cruze 2015 50293 km

Hi Error code 67 appeared to me. When i turning on my car does anyone know what it is?

aliah da altro 7 anni fa

10 segnalazioni

Marco A O F da altro 2 anni fa

67 Reparar a trava da coluna da
direção

Commenta

Code 67 appeared

Chevrolet Cruze 2014 Hatchback 100000 km

I was driving my car and when I stopped it suddenly appeared code 67. It's still there but I can start the car.
May I know if it's safe to drive with this code on the screen?
What should I do to solve the issue?

Salman da altro 2 anni fa

2 segnalazioni

Code 67 Startet nicht

Chevrolet Cruze 2013 ltz 56000 km

Code 67 startet nicht lenkradschloss modul ist gewechselt

Eumel da altro 3 anni fa

2 segnalazioni

Code 67 error

Chevrolet Cruze 2012 Automatic 49000 km

Intermittent code 67 appears on my dashboard, steering column lock error, is the module can be replace without programming?

Alain da altro 6 anni fa

6 segnalazioni

Engine won't start Risolto

Chevrolet Cruze 2012 5600 km

It's the second time I have this problem: while using the electronic key I can open the car, but it doesn't start when I press the "start" button, and in the screen I get the text "Error code 67". According to the instructions I tried using the emergency start putting the key in the designated place but nothing changes. The lights in the dashboard won't even turn off. After around 10 minutes, the car starts like nothing happened. I would like to know if anybody else had this problem and knows why it happens and how to fix it. Thank you!

ury da Stati Uniti 11 anni fa

22 segnalazioni

Miglior risposta (secondo ury)

Antoinette da Stati Uniti 11 anni fa

Dear fellows, I also have a Cruze and yesterday the starting system failed because of the Error Code 67 (steering lock) which is related to a switch underneath the steering wheel. They say there are a lot of cases with the same problem. Good luck!

Antoinette da Stati Uniti 11 anni fa

I have fixed my problem with the infamous code 67, it's due to the fact that at some point I forced the steering wheel with the vehicle turned off, and since it is so fragile for being completely electronic, I broke the lock it has. I was forced to buy a new steering wheel lock system.

shay da Stati Uniti 11 anni fa

For me the final solution was to take it to the service and reset the computer, just as they said there when they first saw the error. The problem hasn't appeared again after three months.

Bender da Australia 9 anni fa

The car just makes a clicking sound then I let the park brake off put my foot on the brake then the clutch and it starts no problem

Ali12345 da altro 8 anni fa

Guys i had the same problem i had to wiggle the box under the steering to make it work. I dont knw if the problem will cone back again.

Commenta

Keylock on the dashboard

Chevrolet Cruze 2011 220 km

My car doesn't want to start it is cranking but not picking up due keylock and code 67, no power on the injectors but fuel is coming to engine, my is a diesel. It s button start keyless.

Ndafenongo Elia da altro 6 anni fa