Problemi di Steering wheel

1 segnalazione

Steering wheel service

Chevrolet Cruze 2014 35000 km

Steering gets locked while driving it is so dangerous
Service traction lock while driving
Steering is shaking suddenly on highway and gets locked

Ajay da Canada 8 anni fa

4 segnalazioni

Error code 67 appeared to me and, as I've read in the handbook, it has to do with the steering column. When turning of the car and opening door, a strange noise can be heard. I assume it is the steering wheel's lock. Does anyone know how to solve it?

Peter da Stati Uniti 11 anni fa

12 segnalazioni

JUDI85 da Stati Uniti 11 anni fa

The error code 67 is an error between the comunication of the bodywork module and the steering column one. In the steering column module there is a device that reads the steering wheel's position and, when reading it inappropriately, the bodywork module determines that its state is not the right one to start, nullifying this function. The problem is within the column module, where a latch locks or breaks. In most of the cases, the problem can be solved by hitting softly the steering column module, located right under the column itself and to access it you simply need to remove the underlying plasic, which has four screws. Others say that, only by moving the direction, when pressing the start button again there will be no inconvenients. Good luck!

Miglior risposta (secondo Peter)

Peter da Stati Uniti 11 anni fa

If the noise when you open the door is longer than usual, you should take your car to some workshop because it is the steering column module that is failing.

Paul da Nigeria 6 anni fa

The steering module device can be fix without going to any workshop if only you have the time to figure it out... you need to know what the steering module is it under the your car steering area inside, just lose it out and clean up the old grease inside and check if the small motor inside is okay if yes just it will work for you and the error will be gone once you complete this process. Make sure that you grease the device back before mounting it back good luck

ryan da altro 2 anni fa

@Paulhi i just wanna ask on how to remove the steering column box? Thank You.

Cruze 2012 da altro un anno fa

Meu cruze LT eco tec 6 aut, ano 2012. Enquanto dirige ou parado ligado, ao virar o volante para ambos os lados el faz um barulho rangendo e estralando na frente. Parece que vem das torres dos amortecedores. Já troquei tudo na frente, menos amortecedores, pois o mecânico disse que estão bons. Mas o barulho permanece. Horrível!
Qual o suposto problema?

Commenta

Error code 67display

Chevrolet Cruze 2011 F16 162000 km

My car chevrolet cruze has this error code 67displayed on the screen and there is a problem of frequently locking the steering wheel

Danny da altro 5 anni fa

5 segnalazioni

Danny da altro 5 anni fa

I would be glad to get help

Commenta

Steering problem

Chevrolet Cruze 2016 1.4L 100000 km

I have a 2016 Chevrolet Cruze 1.4. The steering wheel has about 5–6 degrees of free play before the wheels respond. The steering feels loose, especially after driving over speed bumps or rough roads. The steering wheel moves left and right slightly without changing the vehicle's direction. The steering became stiffer after a repair, but the play is still there. The suspension components have been checked, and the ball joints are OK. The steering rack was repaired and a part inside the gearbox was replaced, but the problem still remains. What could be causing this?

Madina da altro 4 mesi fa

1 risposta

ChevyBrat420 da Stati Uniti 4 mesi fa

Coins be lower control arms are going bad and could be wheel bearing hub assembly