Engine cranks but won’t start. -31deg day the truck started but was running rough stalled a few minutes later. Never started again added diesel 911 changed upper n lower filters bled fuel line at the front of head also checked all fuses. Still just cranks
Will not start , but will turnnover. And start with either. Light on dash that says wait wait to start does not come on. Changed the fuel filter and changed the oil and filter.
My truck was sitting in my driveway about 3 weeks and went to use it and will not start. Problem confirmed as no fuel and the fuel pump stopped working. Changed fuel pump after jumper old pump it and it did not work but it still did not work after changed. Checked voltage at fuel pump driver was 13V but .2V at pump so changed it and still same way
Now have ordered wiring diagram so I can trace the wiring. It appears that the PCM controls the power to the fuel pump so something is stopping it from supplying power to the fuel pump
I’m getting no power to starter or the motor all fuses are good none of my cluster gauges work. I can go down to the starter and turn it over, but it still will not start. Keith switched nothing.
No crank, No start. My mechanic found a loose connection at my BCM and everything started to work perfectly. Now, at random times, my 60A BCM fuse (#51) keep blowing and I lose all power again.
I have almost 700 psi oil pressure, 1650 fuel injection pressure, pressure from the fuel pump is 60 psi, and FICM does sync when i crank, all fuses are good and all relays are good
Spraying any fuel I checked the line after the fuel filter and I'm getting fuel I checked the fuel rail I'm getting pressure at the fuel rail but it still won't start but if I shoot ether in it it will
Theft mode flashes , turn key will not crank or start , can not gain access with scanner. Friend from Ford stopped by and programmed ECM but can't gain access to security theft module. Also can't locate the key ring transciver. Just bought the truck from some people that was swapping computer and stuff trying to get it back running. Sat two years they gave up. I did have it starting and trying to stay running but no fuel was being pumped. Then back in theft all of a sudden. Is there a transceiver ring on this truck from the factory ? And I don't have any info on the fuses and relays.
Dash starts and stops a will, headlights don't come on but running lights do. The blue high beam light in dash stays on matter position of dimmer switch. No wont start. Has throttle and injector cordes.
Fuse #23 keeps blowing every time I try to start it. Initially started on interstate at about 80 mph just shut down on me and would not start back up so I've been tracing trying to find the issue... can anyone help?
Pcm not working when key is turned on and the transmission indicator not working either originally had no front blinkers found the smart juntion box on pass side corroded cleaned as can not order new one out of stock for a couple months after cleaning got blinkers working but truck will not start