Drivers power window does not work

2014 1500 Silverado. The master power window controls in the drivers door only work for the drivers window. Child lock, door lock and unlock, and driver window works, but window lock doesn't, and neither do any of the other window controls. All the other windows work when controlled by their own controls, but when using the driver door controls, even the OBD II scanner doesn't even detect an input, let alone move the windows. We replaced the controls, only to have the exact same issue. Fuses all seem fine, and there are no codes that come up when scanned. We are truly stumped with this one.

The passenger side window will roll up and down from passenger side but will only roll up from driver side. It will not roll down.

No power to passanger side door for window or locks

After messing with the fuse box trying to find turn signal relays. I somehow managed to make it so my driver side door says it’s open while I’m driving and the window indicator on the dash says you need to hold the window all the way up and all the way down like it wants you to calibrate. The problem with that is when the door is closed, the windows do not function. If I open the door the window function is fine. Anybody have any ideas?

Rear windows won't roll down when using front or rear window button controls

No power to the driver side window but can roll down the window on the passenger side with switch on driver side the motor is good

My left rear power window will not operate from either switch. At the same time there is now interior light when the left rear door is opened.

Need to no which fuse to check and be able to locate. Is it bottom or also can't get truck out of valet mode so frustrating

I have this issue. My cooling fans had gotten where they would stay running after I parked it and running my battery down . Then also my fuel pump stopped working and then started working again. But the fans come on when I turn the key off and turn off when I turn the key on. Now I have no power windows or locks only half of my instrument cluster works my abs and battery light and check engine all stay on . I have checked every fuse that I possibly know of I don't know what else to do?

Driver power window stopped working. Door open message shown when door is closed and the radio stays on when truck is shut off.

rightb side of car wont work no windows no right light outside no ac no radio

Left the window down during a rain storm driver side now I have no power from door, panel and truck will not crank or start. When turn the switch, the gauges work, but turn the key. Nothing happens. Can fill the relay, clicking starter has power. Fuel pump comes on.

I was changing My battery when I touch the side panel and I made a spark, and now I lost my radio AC headlights, my intermediate flashes with the security light, borrow windows don't work, sunroof don't work, turn signals to not work. I've checked my fuses and relays and I can't find the problem. Can anybody take me to the right place? Thank you

Help no crank no start 2010 4.3 LS to a 2009 5.3 lt swap why no crank no start with programmed key and all boxes pcm bcm circut breaker and underhood junction box from 5.3 and engine harness. The body harness is still 4.3. No power locks no power windows. Throwing codes for crankshaft variation no learned and feul circuit. Do I need to reprogram bcm as well as pcm? or pinout the body harness at the juntion underhood to match 5.3?

Back rear windows on driver and passenger side do not work