Misfire cylinder 1 P0304 and P0300 with rough idle. Replaced Spark Plug, ignition coil and Fuel injectors and still have the same error code. Additionally, I Clean IACV. Is this a mechanical or electrical issue?

Stalls on acceleration replace fuel pump, gas filter, IAC, MAF, coils, sprk plugs, plug wires, new fuel injectors, canister, radiator, cleaned manifold, cleaned valves, timing is right on, checked vacuum leaks,
Starts right up idles smooth, but some backfire, hesitation or stalls when acceleration.

P1300 code after replacing 3 coils 6 plugs and new wires... it starts then dies after a second or two. Swapped out the ignition igniter with another one and nothing changed.

Looking for the best location to access the dashboard instrument and accessory light wire. This is the wire that lights up the blue LEDs on the accessory switches. I believe it is yellow in color. I can access a yellow wire on an existing accessory switch harness, but the harnesses do not have much slack, and the wires are only small 26 gauge (approx. ) wires. Looking for this to light up additional switches. (Note this is not a power wire and is only for instrument/switch indicator lights. ) Is it in fact a yellow wire? Would the best place to access this wire be at the relay output - assumin… Read complete

What kind of shocks can I use in the rear since I am putting a 2" coil spacers?

Engine oil consumption too much

How to measure hydraulic level using dipstick, cold or hot mark and when to use