Intake manifold problems

Intake manifold: Piping system by which the air/fuel mixture enters into each cylinder.
Related problems:

Top problems

P1604 code with long crank

Toyota Corolla 2013 1.8L 165000 miles
My vehicle has 165,000. Lately car cranks over longer than usual and when it finally turns on it will miss fire for a few seconds and then be ok. Random times check engine light registers a P1604 code. Now I have replaced fuel pump, ignition coils, spark plugs, fuel injector, cleaned intake manifold, replaced PCV valve, oil change, cleaned all grounds and terminals for battery and installed a new battery with 650 cca which the factory only called for a 500 cca. This only happens when car sits for over 4 hours like over night or after working 8 hours. Compression is at 150-155 depending on if doing it with car completely cold lower compression reading and after a 10-15 minute warm up the higher reading. I am wondering if maybe issue with the PCM? Any help would be greatly appreciated.
JrNegron78 from United States a year ago  
JR
2 reports 
Problems with a Corolla? Share them
Submit commentCancel
Submit replyCancel


Find what you needed?

Thank you!