My canopy brake light is no longer working, but the brake lights of the car work nomally

Brake lights wont work, turning signals work, back up lights work, bulbs and fuses ok, and we replaced the brake light switch.

What fuses could be causing this?

I want to be able to get my parking brake size without taking my tire off

One of the brake( left back) are block.

It is not holding like it used to. It needs to hold tighter.

Brake light are not working but other lights works perfectly

Vehicle has had equipment removed - additional lights , trailer brake controller

ABS light on and Stability Controll light Then the Sevice soon light came on. M O T one month ago and service 3days ago...

Hi everyone, please help me. Some weeks ago, the ABS light started turning on occasionally and it now remains this way. I don't know if it has something to do but I've noticed the air conditioning is not working any more. After driving for some minutes in the city, I noticed a power loss; the vehicle slowed down and suddenly felt a jerk as if the engine wanted to stall. This event repeated two to three times until it finally stalled. At that moment, the engine could only be started after the third attempt. The following day, after driving for three blocks, the car stalled. In this opportunity,… Lire en entier

ABS; ESC service required; Hillstart not available. How can I solve these problems?

When I brake (and press clutch) the rpms drop lower than they should, often resulting in stalling. I have replaced the injectors, and serviced the vehicle but still nothing. My plan is to replace the idle air control valve, but if anyone knows what the problem is please let me know.

I have added a Curt 7 pin wiring harness (56431) but I am not getting 12V battery to it in order to power the brake controller (Curt Echo) or trailer brakes. I have double checked all fuses related to the trailer and they are good. Any other suggestions?

I have a 96 ranger here. The speedometer, temp, fuel, and oil pressure gages all don't light up. They work just fine. My blinker, brights, e-brake and all the other lights show up. I replaced the bulbs, the dimmer works bc my cargo light turns on. It doesnt have a cab light in it.

I have a 1995 Ford ranger and I can't get the thing out of park even when I have my foot on the brake I have tried everything I know to do could it be a blown fuse

Acende a luz de check engine, abs e indicador do freio de mão. O velocímetro para de funcionar. O que fazer para corrigir o problema?

I had a code for the mass airflow sensor fix that problem. Now I have no power. It’s like I have the emergency brake on and holding a break.

My running lights or taillights you could call them won't work as well as my dashboard lights. But my headlights work an my brake lights when I push my brakes. I checked the fuses an all are good.

La señal luminosa del ABS no se apaga

My brakes stop the vehicle when pressed but will not come back up on its own. I have to manually pull the pedal back up each time. New brake booster and master cylinder. Any ideas of what’s next?

Ranger xls 2018... when on acc , connect caravan...light, brake all work... when turn on running... no power or anything working... I disconnect caravan... and test the trailer female connection from car...no power all dead... turn off...acc on all working... so fuse seem ok cos of acc... I think it's ignition relay or something cut off ??

Rear antilock light is always on but gets brighter whenever the brake light intermittently comes on. Have attempted pulling codes both with an OBD1 scanner and by pulling blink codes. Have not been able to get any codes out of it. Fuses are all good and every rabs related component passes a visual inspection. I have not been able to figure this one out. Does anyone have any suggestions on where to look.

Backup lights right rear turn signal not working I don't know what the problem is everything else seems to be working at fine it's dumped my dad he passed away I got this truck every a year all I had to do was put a brake line on it it's been a great truck however he did bypass the system he did install a a NASCAR starter on it. Push button straight to the starter solenoid. I wonder if this has anything to do with it also he installed a trailer hitch it got cut off wondering if that has anything to do with it other than that I am stumped any help would be much obliged.

Problema no ABS, não está funcionando, luz acesa e mal funciona

Hi, my ranger’s breaks have been coming on while driving, lucky I has been driving slowly when this has happened, mechanic said it is a problem with the ABS braking system, and that it could happen at any speed and very dangerous. I know there was a previous recall on rangers for this problem but as there is no recall I have been told by ford that I will have to pay for the repairs. Has anybody had this? Or any advice? Thanks

The abs makes nois as soon as i drive or pull away before i reach 20 calommeters every time i switch of the baki and start it and drive abs makes a noise and goes away after maybe geting presure i dont know

Abs light and hill assist off together with slippery light appear on dashboard

I just put a new back up switch on my ranger, they work, but only when brake is depressed, let up on the brakes, back up lights go off, while transmission is still in reverse!!!

I had new wheel bearing and now very time a break there is a sound like a drown noise coming from it only when I slow down. Help

Abs light flickering please help