Hi, I own a Ford Mondeo Ghia and it happened to me that it suddenly stalled and did not want to start working again. The car was towed to a mechanic, the fuel filter was replaced and the engine started. Some days later, the vehicle started stalling when driving, either at 10 or at 75 mph. It now does it around 3-4 times a day and the orange light indicator turns on. One mechanic told me it is a problem with the fuel pressure, which is quite expensive to solve, but another one told me the failure might be caused by another thing. I really do not know what to do. Has this ever happened to anyone before?

Engine turns over but does not fire

Hi, i have a ford mondeo 2015 sedan, it starts and drive sometimes and doesn't at time, i diagnosed it and certain fault codes showed up and also the park brake, abs, traction,engine light stays on
The diagnostic showed a problem with abs communication system and that the left motor had an issue
. . . Its not communicating with ecm/pcm
. . . Pam
On BCMII it showed code B1315
And also PCIM not comunicating with ecm/pcm either can these cause it not to start

At the beginning was on and off, until now. It doesn't starts at all. I sprayed ether inside the body Throttle and started for a second or two.
My conclusion is that the problem is the fuel pump. Could anybody contribute with other idea? If I do it , am not going to remove all the shit to take the tank off. Ill cut thru the floor to reach the pump.

I have a Ford Mondeo saloon diesel that has been parked for a long time, almost 7 years. Recently I tried to start my car but it did not want to start and the car engine and dashboard lights did not turn on. What is the real cause, can you please help and explain to me what I should do. Even though the battery has been replaced and the engine oil has been serviced before I started my car.

Engine stops randomly and at first starts again, but after it happen a few times it will not start again

When I connect the diagnostic tool, it cannot find the car's information automatically until I enter it manually. In addition, I have a problem with the CAN bus connection to the power steering, ABS, and the odometer. Often the engine does not start until I clear the errors. The ABS works without problems, the power steering also works, and the odometer works. What do you think the problem is and how can it be solved?