Problèmes Suspension

Meilleurs problèmes

ABS indicator

Chevrolet Cruze 2010  70210 km
When driving at 50 mph, suddenly the ABS indicator turned on, I turned off the engine and, when starting it again, the indicator was no longer there. One week later, the ABS appeared again. Suspension, brake pads, wheel hubs and drum brakes have been checked but no failure has been found. It was scanned and the failure was indicated to be in the left front ABS sensor, so it was changed but, two days later, the indicator appeared once more. When scanned, the same failure is indicated, so it the left sensor was replaced again and that same day the ABS indicator turned on. I would like to remark that once the indicator appears, I turn off the engine, start it again and it is not there any more. Does anyone have any idea what might be happening?
LEMUEL de États-Unis il y a 11 ans  
LE
6 signalements 
crys de États-Unis il y a 11 ans
Two damaged sensors from the same side and in the same tire... that seems to be a failure in the wiring.
Dorinda de États-Unis il y a 11 ans
You need to re-calibrate the turning sensor to zero, which is done with a scanner gm tech2.
Sizwe de Afrique du Sud il y a 6 ans
My car just turned off while I was going then after that it refused to start I got someone to diagnose it they said it sensors I changed them but still I called another mechanic he came he said it coil pack n EGR valve and I changed it but still my car when it start the engine shakes and after reading everything it turns off and it making sound in the aoxhust "bba bba bba" it does have power I need help I've tried my best
Commenter

Steering problem

Chevrolet Cruze 2016 1.4L 100000 km
I have a 2016 Chevrolet Cruze 1.4. The steering wheel has about 5–6 degrees of free play before the wheels respond. The steering feels loose, especially after driving over speed bumps or rough roads. The steering wheel moves left and right slightly without changing the vehicle's direction. The steering became stiffer after a repair, but the play is still there. The suspension components have been checked, and the ball joints are OK. The steering rack was repaired and a part inside the gearbox was replaced, but the problem still remains. What could be causing this?
Madina de autre il y a 2 mois  
MA
1 réponse 
ChevyBrat420 de États-Unis il y a 2 mois
Coins be lower control arms are going bad and could be wheel bearing hub assembly
Commenter
Des problèmes avec ta Cruze ? Partage-les
Envoyer le commentaireAnnuler
Envoyer la réponseAnnuler


Recherches populaires
RadioClutchOverheatingFusebox