The gauge cluster on my 2008 Tahoe dies randomly. Most times it just like resets and comes back on but sometimes it just gets stuck and doesn’t move. It runs fine everything works. Signals and all that jazz but the gauges freeze in place and die. And the LCDs also go out. I pulled it and checked for any burnt or messed up soldering components and it seems fine. Please help ;-;
Battery died and had to jumpstart my Tahoe. Now the low beam headlamps won't come on. High beams and fog/driving lights work. Vehicle has been jumpstarted in the past, but never had this issue before.
Having the same problem my low beams won’t come on but everything else works markers. High beams, signals running large dome light, but I can’t get that Logan come on.
Battery died, jump started the car and drove to parts store. Purchased and installed new battery. After installation, low beams stopped working, parking light come on instead. When I switch in and out of auto mode, the parking lights go on and off. When I turn the switch to turn on headlights, the parking lights come on. High beams work fine. I tried changing the low beam relay, but no help. Also, the day before I replaced the battery, the low beams were working fine, both sides.
The odds that both headlamps fail at the same time is astronomical. But that is what happened. The only thing I can think of that might have caused this was the jump start caused a surge that took out the lamps. Replaced both lamps, all is fine now.
So I changed out my pcm with another, tried resetting it. Failed! Swapped ignition switch that matches the pcm swap. Still nothing. Now my battery dies within minutes of attempting to try anything. Any help will be great. I must add if I put my original parts back on it cranks!
After I drive for a long time it feels like a soft limiter gets activated and this recently happened after installing a cold air intake but I’ll be driving and all of a sudden it’ll cut power and shift wonky anyone with that issue