Check the fuse! There's videos on youtube that will help you replace it. All my lights went out at once and people kept saying it was an expensive fix. Nope! I went to autozone, bought a fuse and replaced it in five minutes. You will need a plier to pull out the old fuse. Good luck!
No crank no start, when it does crank won’t turn off, lost all communications with every module, ecu configuration mismatch codes, every fault light will show and the service p brake stays on with stability control and check engine light
Using J-scan and Alpha Obd and then finishing with thinkdiag+ (they all have there strengths and different functions) i had to pretty much clear each dtc from the module. Proxy Align a few times with each of the 3 programs and then recalibrate the eps model. All codes cleared lights off and runs better than ever. It all started with traction control light that I ignored for a while, and then came to fruition after my transmission mount was replaced.
I shifted into drive and I heard a thump when as I changed gears it got stuck on N neutral and wouldn't shift into any other gear unless I force it so turn off vehicle key fob stayed on ACC .popped open hood and disconnected battery for a minute reconnected battery and was able to shift to park. I tried a second time ti shift into reverse and same issue my dash says service park break nothing about transmission issues there's a yellow sign on with a P! In a circle if I need to change park brake we're is it located or how do I replace or adjust it?
No check engine light, remote start works fine, but when approaching a Stop light, the engine used to turn off when i came to a compelte stop, adn then automatically restart when i took my foot off the brake.