Lights problems

Top problems

Stop LIghts issue SolvedSolved

Chevrolet Suburban 2001 C1500 LT 5.3L W\traction control 168000 miles
No brake lights: I have power to 20 amp "STOP LP" but no power to "VEH STOP" or "CHMSL"
Jeff from United States 2 years ago  
JE
Rank 2
3 reports 
Solved
Best answer (according to Jeff)
Jeff from United States 2 years ago
Plug undone under dashboard cover in front of steering wheel
Rara from United States a year ago
Thank you so much Jeff! Saved me $200 in diagnostic fees and probably more just for a plug. I cut a whole in the plastic to get the connector from behind the plastic housing and once connected I had brake lights! Thanks truly.
1
Comment

Instrumental Cluster Not Working

Chevrolet Suburban 2003 Chevrolet Suburban 1500 193000 miles
Cluster Arms Going crazy. Lights Blinking
pkelly1966abc@gmail.com from United States 3 years ago  
PK
4 reports 
Kdglass from United States 3 years ago
I have been experiencing the same problem. What is the remedy?
215tk from United States a year ago
I had this happening too, took apart the ECM module from the engine, cleaned with an electronic cleaner and let it sit and dry for a good hour before putting it back together. I added new weather stripping along the sides of the hood to better seal from water and cleaned out any pine needles and junk hanging out along the drainage by the wipers and front windshield. Crossing my fingers that it did the trick because I haven't had that happen anymore. I did a ton of reading about it and it can also be a bad ground connection so I had already cleaned those in the engine bay and under the car.
Comment

Low beam lights not working

Chevrolet Suburban 2011  120000 miles
Low beam headlights is not working. All the fuses seam to be fine. Replaced relay ,with no results I checked one bulb that seems to be ok...
johnny from United States 15 days ago  
JO
1 report 

Headlights flash when using right turn signal

Chevrolet Suburban 2023 Premier 80000 miles
Every time I use the right turn signal my headlights flash. I’ve tried using it in different ways but the result is almost always the same. How can I fix this?
MariahNic91 from United States a month ago  
MA

Entire dash cluster went dead while driving

Chevrolet Suburban 2015 5.3 LTZ 155000 miles
The body control module went nuts. Started giving me lots of service request. I would dismissed them. And the cycle would begin again. Finally the entire dash cluster went black. I drove home without turn signals. Thankfully, it was daytime.
Colt from United States 3 months ago  
CO

When I put the emergency brake on then take it off the light stays on

Chevrolet Suburban 2007 5.3 208800 miles
The brake light stays on when I release the emergency brake and it stays beeping
Chris from United States 4 months ago  
CH
1 report 

Brake lights don't work

Chevrolet Suburban 2005 1500 200000 miles
Brake lights don't work when I step on brake pedal
GabbyV from United States 4 months ago  
GA

My rear wiper blade, plate light, and driver brake light is out.

Chevrolet Suburban 2012 5.3L 197000 miles
My rear wiper blade, plate light, and driver brake light is out. But the turn signal that uses the same light bulb lights it up. Is it a fuse or wiring?
ReapDuMi92 from United States 5 months ago  
RE
1 report 

Driver mirror

Chevrolet Suburban 2003 SUV  270000 miles
My driver mirror is not working with my turn signal, all my signals work except my driver mirror I also have power to the power mirrors but the led does not work at all. I had my oem mirrors on that I assumed burnt out but even with these new mirrors the driver side still does not come on the connection from the fuse box to the door controls has power but from the controls to the mirror it does not, but all functions on the door controls work any ideas?
801burban from United States 9 months ago  
80
1 report 

Passenger headlight Blinker Issue

Chevrolet Suburban 2011 1500 LTZ 208000 miles
Passenger headlight blinker works intermittently. The blinker bulb burns when the headlights are activated and when I double lock the car with the fob. When I turn on the blinker, the bulb does not blink. The mirror blinks. The tail blinks. I replaced the bulb. Replaced the headlight wiring harness. Replaced fuses. Cleaned connectors. Cleaned the ground. I know next to nothing about cars. I'm a google mechanic. Please help me with a solution. Also, the front passenger tire pressure sensor has stopped working. I recently had it replaced, so it's very new.
Mark Malbs from United States a year ago  
MA
2 reports 

Electrical problems

Chevrolet Suburban 2001  200000 miles
I had a wire running from the fuel pump to the fuse box under the hood that went into the fuel relay the stop light thing on the brake pedal was bad. I took it off, and I lost all power and now nothing work.
1
2
Zeek from United States a year ago  
ZE

No taillights

Chevrolet Suburban 2002  275641 miles
My tail lights are not working but my turn signals and brake lights work
Jaybird from United States 2 years ago  
JA
3 reports 

Fuse for highbeam

Chevrolet Suburban 2000 Suburban 1500 LT 5.3 liters 232767 miles
Need to know where the fuse us fir the high beam & what fuse to use
BlueKat13 from United States 2 years ago  
BL
2 reports 

Alternator not charging under a load.

Chevrolet Suburban 2007  200 miles
My 2007 Suburban was dropping voltage down to 12.3 sometimes. Replaced the alternator and now it’s at 14v all the time except if I turn on the a/c and or the headlight it will drop dow to 12.3z
Jerrysuburban from United States 2 years ago  
JE
3 reports 

Brake light won’t turn off

Chevrolet Suburban 2011  250000 miles
My brake lights won’t turn off, it looks like I’m riding my brakes which I’m absolutely not. I tried replacing the brake switch and it still did not work. Help!
Karinaaaaa from United States 2 years ago  
KA
3 reports 

No brake lights

Chevrolet Suburban 1999 Suburban  222048 miles
Brakes won't come on The blinkers and hazards both work fine
Kellbell from United States 2 years ago  
KE
10 reports 
Problems with a Suburban? Share them
Submit commentCancel
Submit replyCancel