Relays problems
Relays: Switch activated electrically.
Read more
More specific problems:
Related problems:
See owner's manual
See fuse box diagram
Top problems
2 reports
1
JZ
Same. My compressor clutch stays engaged constantly without disengaging, I suspected a faulty/stuck relay but there is no AC Relay that I could find anywhere
Vote helpful
CommentFront Power Outlet inop. 
Solved
Nissan NV200 2013 100000 miles
Front Power Outlet Inop.
No power to outlet.
No power to outlet female connector.
20A fuse appears to be good.
I suspect a 1M relay but it is not shown in the diagram.
No power to outlet.
No power to outlet female connector.
20A fuse appears to be good.
I suspect a 1M relay but it is not shown in the diagram.
1
1 report
Best answer (according to Mark)
The female power receptacle formerly a lighter outlet has open in internal socket.
Replacing power outlet.
Replacing power outlet.
CommentCompresor no activa
Nissan NV200 2020 75000 miles
El compresor no activa y no se donde esta localizado el relay del compresor
5 reports
CommentAC Clutch Constantly Engaged
Nissan NV200 2015 2.0 Cargo Van 220000 miles
Cant find the AC relay, Can figure out why the AC clutch stays engaged constantly, and I cant let the customer walk away with a Compressor thats bound to shred itself into the whole A/C system. Dont Know what to do, I have a professional scanner as well and no data can be shown for A/C system sensors.
Please help
Nissan NV200 2012 Van 140000 miles
Codes p2263-turbo
P0235- booster pressure sensor
P0089 fuel pressure
Also 4 injector codes. The van is cranking over but won’t start. Fuel pump works checked with multimeter. New fuel filter, fuel pressure sensor is fine check with multimeter.
Any ideas to even get it started so I can then work on it? Would it be relay but I can’t locate it? Please help thank you
P0235- booster pressure sensor
P0089 fuel pressure
Also 4 injector codes. The van is cranking over but won’t start. Fuel pump works checked with multimeter. New fuel filter, fuel pressure sensor is fine check with multimeter.
Any ideas to even get it started so I can then work on it? Would it be relay but I can’t locate it? Please help thank you
3 reports
Problems with a NV200? Share them
Find what you needed?
Thank you!
