I am trying to find the back brake bleeder location on ford E350 7.5L 460 engine. Would love some help

Changed the brake pedal switch and both brake lights but both cruise control and brakelights are still not working , where is the fuse or relay for this please ?!

My van was parked and someone rear-ended it at about 35mph. I was able to drive it fine for about 100 mi then the fuel guage went to E and wouldn't start. I noticed the fuel pump fuse was blown Replaced the fuse it started and ran for a 1/8 mi and smoke came out from under the dash and fuel went to E again and died. Fuse was blown again. Back up sensor wire harness was broken and shorted from being rear-ended, will fix that next but also my scanner showed ABS issues and fuel modulator off line and a number of other codes. I cant find a decent wiring diagram for the fuel modulator, fuel pump, from the fuse box, I'm thinking theres a short somewhere. Yes I checked the impact switch and reset it even though it didn't seem to be popped.

When key is on or engine running only the brake lights stay on àll the time...nothing works but the brake lights and they stay on

I will like to know either the description, definition, I mean something on the following Engine codes DTC5284 and DTC9352. Now 1- on the ECU “works” just OBD to Scanner (solus) keeps waiting for ECU callback (haven’t bothered to check OWNERS ORDERS) 2- Air intake makes a hauling noise IDLE only (noise continues after removing [Air intake induction] from manifold briefly) 3- brake pedal go down slow & smooth Went pressings gently on hard braking is perfect “speed and weight” makes no difference *** propane and brake cleaner it’s been used in commonly reachable suspected areas with no resul… Read complete