Sensors: Electrical device that measures the different performance parameters of the car.
Read more
They are used to measure the air pressure, the temperature, the speed, the liquid level, the characteristics of the exhaust smoke, etc. They are connected to the ECU (Electronic Control Unit) and they provide the information needed to improve the engine's performance.
I replaced the starter and the car still wont start. Ran the OBD-II tried multiple replacement parts. -starter
-MAP sensor
-Throttle body
-new gaskets on intake manifold and throttle body
-new battery
I changed the thermostat sensor both of them I changed the thermostat itself I changed the relay I direct wired the fan to the battery and it come on but still overheating I can't figure this out
The inspection was carried out for the following reasons, but they were not the reason
1 no Leakage in the air ducts
2 no Wiring and connection problems
3 The map sensor works well
4 The engine air filter is not clogged
5 The turbocharger was replaced and the problem is still the same...
The problem is that when driving at normal and medium speed, the engine works normally, but when you press the accelerator pedal hard, a disturbance occurs throughout the engine. The throttle and slip light flashes, and when the engine is turned off and restarted, it works normally again.