Brakes problems
Top problems
Passenger side brake and blinker light stoped working but bulbs are no
Ford Fusion 2008 175000 miles
The I'm thinking maybe just a fuse but I know zilch when it comes to mechanic work.
3 reports
JO
When you turn the wheel it have a noise the front wheel I want to why it do that
Vote helpful
CommentThe wires freeze when the handbrake is applied
Ford Fusion 2002 1,4 130000 miles
The wires freeze when the handbrake is applied
Check brake sistem light on key 🔑 light too so the motor doesn’t turn
Ford Fusion 2014 Ford fusion titanium hybrid 190000 miles
The hybrid battery stop to work and the car just work with the motor on never turn on hybrid and spending a lot of gas
1
Braking and engine sound
Ford Fusion 2006 50000 miles
When braking my car, an engine sound appears, it starts vibrating and it seems as it were about to stall. When it is already warm and I am driving along an uphill road, it loses strength and it stalls. Even more, it is not braking properly. Brakes and brake pads have been checked and they are alright. Could you please tell me what it might be? Thanks.
2 reports
Buddy it is the car's curved arm coil that is damaged. By simply changing it your problem will be solved.
If the brakes are failing it might be that the disc is bent.
2015 Ford Fusion 120k miles. I have the same problem here. The car occasionally starts vibrating and getting weaker going up an incline until it stalls. The breaks get loud and grindy and the brake pedal shakes. Everything just returns to normal after it "rests" for a bit.
Does anyone know what the relay number is for the vacuum pump in a 2018 Ford Fusion?
Tiene encendido en rojo el testigo de frenado y revisé el liquido y pastillas y esta bien ,al igual que el freno de manos. Que podría ser y que debo hacer para apagarlo
CommentPowersteering
Ford Fusion 2015 Fusion SE 222222 miles
While driving down the road I got a God awful alarm telling me to pull over & I lost power steering! This is when I found out I don't have a power steering pump so can't check the fluid! @ the same time I get several alarms saying Service Advance Trac, Hill Brake Assist Unavailable, Hill Park Assist Unavailable & both traction control lights are on & stay on! Someone pleeze tell me I don't need to replace the rack & pinion! I've changed ALL the fuses that could have any kind of effect on it & Googled the shit out of it & can't figure it out! What would a wheel speed sensor have to do w/the power steering? I can't afford to take it into the dealership & this is way beyond my knowledge! HELP!
18 reports
Hi! Have the exectly similar issue. Have you find a solution?
It wasn't in the same kind of car (2012 Acura TL) but I had an identical issue, and it turned out to be a busted alternator, causing the electrical system to go haywire
My 2014 fusion did this and it was the brake switch behind the brake pedal
CommentKey removing
Ford Fusion 2007 100000 miles
I cannot remove the ignition key from the switch. I have already checked the lever's switch and it is workingg properly. I personally believe it must be the brake's switch but I don't know where to find it or how to check it.
2 reports
I had the key stuck just as you mention and the problem was solved when I took the car to a locksmith. The thing was that a solenoid that goes in the ignition cylinder was damaged, so he disassembled the switch, took out the corresponding solenoid and installed it back again without this piece. The reason was that a new one is really expensive, and without it I have yet not had any problems with the starting. Hope it helps!
The same happened to me, the mechanic removed a sensor on one of the switch's sides, took out a small steel tube which is responsible for giving way to the key and connected the sensor back. It worked but the only inconvenient now is that the key can be taken out at any speed.
My11fusiin under carscrewdriver to starter it wants crank from ignitionkeyeverky lights up dashboard no. Crankto starterto spark coils
CommentAbs traction control and brake lights
Ford Fusion 2010 SEL 208265 miles
My abs light traction control light and brake light is all on. The sensors have been changed. The brakes work perfect. Why wont the lights go off
1 report
Same issue here, swapped the sensors. Lights still on. Testing fuses right now. 2015 Ford Fusion SE
CommentEverything is going crazy electrical.
Ford Fusion 2016 2.0 AWD 154000 miles
My car seems like it's draining power of sorts draining my battery dead. I put the tester to it an it said ignition problems. Then after that it said there was a bad wheel sensor or a break in the wiring now my cigeret light stays on after I shut the car off an then the damn radio turns on automatically. I power the radio off tomurn the key to off an then the radio comes on. Could my issues all be coming from a locksmith that doesn't know what he's doing when my favs both were replaced an one just quit working two weeks ago an the fans were made a little over a month. I have traction control l… Read complete
2 reports
I replaced the old fuse box with another fuse box that looks identical
Ford Fusion 2016 2.5 4 dr SE 142000 miles
Started up but a couple codes popped traction control abs and the steering wheel would not turn
3 reports
Horn Blows randomly
Ford Fusion 2013 142000 miles
Horn will randomly blown making a turn, recalls was done at Ford Bushing part missing and brakes recall. Steering wheel was completed locked. Horn started to slightly beep, resolved it self and now few weeks later Horn will blow on each turn
6 reports
Immobiliser light flashes like mad for roughly 5 minutes
Ford Fusion 2008 5 Door 88000 miles
When I turn the key, there's not a sound. Immobiliser light flashes like crazy. Sometimes interior light won't switch off.
The engine, oil, battery & handbrake lights stayed on & when I retry after a few minutes it works. Has happened 3 times in as many weeks.
The engine, oil, battery & handbrake lights stayed on & when I retry after a few minutes it works. Has happened 3 times in as many weeks.
14 reports
Problems with a Fusion? Share them
