Code for throttle pedal position sensor and there is no throttle response

I have changed changed crankshaft sensor. Have checked all fuses changed fuel pump cleaned charcoal canister and furge valve but still
L won't turn over

Trying to clean the o2 Sensors. They're are 4. This is what I've tried so far: 1) sprayed wd 40, Blast, and melted crayon for the threads. Used an oxygen sensor socket, pipe wrench, even a hose clamp on the o2 Sensor socket. They would not budge. Any suggestion would be greatly appreciated.

Will not shift out of low gear reverse Park neutral driver all fine there is no elimination on tow haul button and the only code is 11 72. No transmission light no slip light etc

VDC and SLIP light on and vehicle in limp mode. Then wouldn't start.
Replaced fuel pump and intake/air flow sensor...now turns over but won't start

Hi everyone After doing a bunch of work on my truck, alternator, exhaust manifold, front struts,mafs sensor,tuneup, and repaired some broken wires for my fog lights. Truck ran great but my dash lights were still coming on or there would be no dash lights but it would go into slip mode and lose power. Turn off VDC and truck runs no problem but eventually the other lights would come back on, abs, slip. And vdc. Anyways long story short I had a head light out so I went to replace it. I still havent replaced my inner fenders so i sstarted the truck up and cranked the wheel to the right all the wa… Read complete

Sell, I've troubleshoot everything electrical on my 2019 Titan in search of the miss it has, replaced cam sensors, new coils, etc. My passengers side VVEL solenoid motor works as tested on the bench, built appears to not be getting power. Could it be the r1 relay or would that relay not shut down both VVELs?