It started with the turn signals I change the fuse for the turn signals three times within 2 days. Then all of sudden the hazards and turn signals weren't working but the fuse was fine. I tried looking stuff up on the internet at that moment and seemed mentioning of I believe it's called the hazard relay but it's under the dash directly above the OBD2 hook up. So I unplugged it, took it off took it into AutoZone to see if they had a new part and I was just going to buy a brand new relay to to replace it. But they didn't have one so I took the old one back out plug it back up and all of a sudde… Leggi completo

No turn signals no flashing light

Neither will come on how long will the wiring harness take toreplace

Front blinkers quit 2 weeks after replacing. USB plug in quit

Hello! My front passenger turn signal has stopped working (also the park light) on my Explorer. The headlight, high beam, and side (turn signal part) still work but not the actual front signal. All other lights work fine. I’ve seen where it could be burnt, or blown, but I’ve never gotten a definitive answer. Any ideas? I just don’t want to spend over $300 on a new headlight housing if it’s something simple.

Turn signals do not work but the emergency flasher does

Neither wor and the break light stays on as well as the abs light and the traction light

Brakes lights don't work but running lights and turn signals do

The turn signals will come on but not blink and the fuel Guage won't work

Lights?high beams work low beams do not work when you flip the turn signal switch.

Side turn signals, windows and wipers stopped working

Bought the explorer a week ago. Had to jump start it to move it. Only blinkers and hazards were not working. Got it home and pulled battery to charge, checked fuses, then next day installed battery that was in it. When truck was fired up and running. Found that the power windows, interior overhead lights(dome), stopped working, the 4x4 hi/low range indicator light on dash is blinking+switch on dash will not do anything either, went today for another test drive and when I got back ,shut off engine, battery was dead,no start. Different battery in truck running- volt meter read 13.5. Is there a control module for these items. And do i replace alt due to low output.

My brake lights are not coming on when I press on my break to stop, but my regular lights and turn signals are working there, but I do have the top brake light above my rear window is the only brake light I have the fuses aren’t blown and I don’t know what else to check

Putting on a 7 way adapter I have running lights but no brakes and no blinkers the trailer is a 4 way adapter

The turn signals work on the left tail light , no brake lights or reverse lights on that side. Passenger back tail lights work fine. ?

Put a turn signal and break light and nether lights work