Timing belt Probleme
Timing belt: It transmits movements from the crankshaft to the camshaft. It keeps the engine synchronized.
Mehr lesen
Was ist der Zahnriemen auf einem Matiz?
Verwandte Probleme:
Bedienungsanleitung ansehen
Top-Probleme
Power loss, jerks and stalls 
Gelöst
Daewoo Matiz 2000 144000 km
Hello, I have a big problem with my Matiz 2000. It is powerless and, at idle speed, once the normal working temperature is reached, revolutions raise and drop continuously, generating a low oil pressure. Even more, the car jerks considerably at any gear and both when cold or warm. In order to stop the jerking a little bit, I need to keep the clutch pressed more than usual, generating a disgusting burnt clutch smell. I've replaced everything already, including: cylinder head, valves, filters, fuel pump, sensors, TPS, IAC, spark plugs, wires, camshaft, timing belt, hoses, among many other things, but nothing got better. The car has got a good compression, around 160 pounds. I really do not know what else to do. Thanks in advance for any help you could give me.
19 Berichte
13
JE
I had a similar problem and the failure was the crankshaft axial play, as it was wrongly installed.
Hilfreich14
Beste Antwort (laut les82)
LE
Luckily, my problem was finally solved. The camshaft has got a pin or cog that can be easily seen. In my eagerness to replace everything, I also changed the camshaft but, the one I bought, belonged to a Daewoo Tico and it was not exactly the same; this cog's position was the one that was slightly different. So I decided to buy a new Matiz camshaft and, when replacing it, the vehicle started working perfectly again. Hope I can help others with the same problem.
Hilfreich3
BR
My really suck fuel, please what's the issues of that.
Hilfreich8
DO
Hello guys am Douglas from Ghana west Africa. Please a have a problem with Matiz Chevrolet 0.8 engine capacity 2009 model. My timing belt got tier and it affected the valves. I have replaced with a new head but now the car can not pull. Please any help? Thank you!
Hilfreich3
SK
Try check your oil and plugs because I had the same problem and mine was not pulling
Hilfreich13
CH
Hello, Am Chris from Ghana. My Daewoo matiz fails to move instantly whenever the engine cools down until it heats up before it will move...Need solution pls.
Hilfreich3
FA
Check if your thermostat is still working well or has been removed.
Hilfreich8
SA
My dawoo matiz problem is the car run on 1500/2000 RPM the missing is start end I push the accelerator to up the RPm 3000 the missing is gone the car speed to much fast what is the issue
Hilfreich6
DO
Hi ek het n proebleem my kar loop en ruk en dan vang hy spoed het nuwe filter en pomp vir vang asof die petrol nie reg deer kom nie
Hilfreich1
CA
Had a similar problem, found the earth from the alternator not good and the car was 100% after I connected it. Seems the ECU needs full voltage from the alternator and can't work on battery power alone. Can try this...
Hilfreich4
CL
I got a problem with my Matiz I changed fuel pump , done service , new spark plug leads , map sensor and throttle sensor but my car still jerks while driving if I wanna change to another gear and miss fires
Hilfreich6
DA
I got a problem also when I am driving this car fuel system is not coming constantly, however when I push the fuel pedal the compression system is not working properly what is the case
Hilfreich
VI
Igual me pasa con Daewoo Matiz
HilfreichMA
I still have the problem; I've already replaced my camshaft and crankshaft, and my car still has extreme difficulty starting after driving for a few minutes. (P.S.: my AC and engine fan are also malfunctioning, but I don't know if it's related)
Hilfreich
KommentierenCrank but won't start
Daewoo Matiz 2001 Hatch back 250000 km
I have changed the sparkplug and bougicord. Petrol does move to front to the engine and my timing belt is fine but it crank but won't start can any1 help me
KommentierenMy matiz car go slow when I accelerate
Daewoo Matiz 2008 Hatchback automatic 210630 km
My timing belt got tired, I replaced it and the valves, now in the morning when I moved the car I takes a while before it move both reverse (R) and drive(D). Yesterday, while driving I realised that the car isn't pulling/ move slow
Not pulling sometimes goes off when I removed my leg from the accelera
Daewoo Matiz 2009 Automatic 6792 km
My timing belt got tier and valves got burt. I have fixed everything and the car move now but not pulling well and sometimes it just go off when I removed my leg from the accelerator and accelerate again. It get very bad when it get heated to normal temperature
2 Berichte
Engine problem
Daewoo Matiz 2009 Hatcback 3600 km
My timing belt got tier and affected the valves and the head. So after replacing a new head, now the car can't pull. Please what might be the cause. Thank you!
5 Berichte
Probleme mit einem Matiz? Teile sie
War das hilfreich?
Danke!
