Code P0300 problems
Top problems
Multiple random misfire code 0300
Ford F-150 2013 75600 miles
While driving the engine just lost power. When you depress the acclerator it was as you are not getting any fuel. I had it towed to a shop, the shop said they diagnosed the problem and it was the fuel pump, it was not getting the right amout of pressure. They replaced the fuel pump. When I picked up the truck it had a little rattle when changing gears, the mechanic said that the computer may needed to be reset! Drove the vehicle for a day and it shut down again with the same problems. Had to have it towed back to the shop.
7 reports
1
JI
I have the same problem. It happens randomly, a lot of times after rain or sitting for days without starting. When it happens, the check engine light comes on and the truck has no acceleration. I turn off the truck and wait a few minutes, then it runs fine. The check engine light disappears after a while most times. It's a very confusing situation. I've changed the coil packs, the plugs and wires. It still does it periodically.
Vote helpful
CommentCheck engine light flickers and the engine loses acceleration
Ford F-150 2012 57000 miles
When the truck goes over 4000 rpm the check engine light flickers for about 20 seconds, and at that point the truck loses acceleration and then it goes back to normal. The error codes I have are P0300, P0302 and P0306. Thanks for your help!
8 reports
Those error codes are from the cilinders 3 and 6, check the spark plugs and coils
CommentProblems with a F-150? Share them
Find what you needed?
Thank you!
