Body, paint and exterior problems

12 reports

JUDI85 from United States 11 years ago

The error code 67 is an error between the comunication of the bodywork module and the steering column one. In the steering column module there is a device that reads the steering wheel's position and, when reading it inappropriately, the bodywork module determines that its state is not the right one to start, nullifying this function. The problem is within the column module, where a latch locks or breaks. In most of the cases, the problem can be solved by hitting softly the steering column module, located right under the column itself and to access it you simply need to remove the underlying plasic, which has four screws. Others say that, only by moving the direction, when pressing the start button again there will be no inconvenients. Good luck!

Best answer (according to Peter)

Peter from United States 11 years ago

If the noise when you open the door is longer than usual, you should take your car to some workshop because it is the steering column module that is failing.

Paul from Nigeria 6 years ago

The steering module device can be fix without going to any workshop if only you have the time to figure it out... you need to know what the steering module is it under the your car steering area inside, just lose it out and clean up the old grease inside and check if the small motor inside is okay if yes just it will work for you and the error will be gone once you complete this process. Make sure that you grease the device back before mounting it back good luck

ryan from other 2 years ago

@Paulhi i just wanna ask on how to remove the steering column box? Thank You.

Cruze 2012 from other 10 months ago

Meu cruze LT eco tec 6 aut, ano 2012. Enquanto dirige ou parado ligado, ao virar o volante para ambos os lados el faz um barulho rangendo e estralando na frente. Parece que vem das torres dos amortecedores. Já troquei tudo na frente, menos amortecedores, pois o mecânico disse que estão bons. Mas o barulho permanece. Horrível!
Qual o suposto problema?

Comment

No power to ac or heating controls

Chevrolet Cruze 2015 LT 1.4l 93000 miles

The windows were down and it rained.Ever since I have no power to controls. Checked fuses none blown

Bubbatuck#007 from United States 2 years ago

2 reports

chevycruze2015 from United States 2 years ago

Were you able to fix the issue? i have a similar experience.

Comment

Eletrical problem

Chevrolet Cruze 2010 manual 2.0 diesel 78000 miles

First hi beam relay stuck light not going off, then horn not working same with wiper. All fuses and relays working, All ground from fuze box ok. All good up to fuse. What's wrong.

Jack from India a year ago

4 reports

Ferhat from other a year ago

Vitesin sağ tarafında plastik kapağı sokun orada ci modülü var o arızalı

Comment

Power locks not working with fob

Chevrolet Cruze 2012 150000 miles

Fob will not lock/unlock doors ,truck will not pop open with fob, have replaced battery it did not help car does still start

Buddy from United States a year ago

6 reports

Ronandtracy from United States a year ago

Can't use either key fob. Out of the blue. Is there a fuse I can check?

Comment

Lock Module does not work on both key fob and inside the vehicle panel

Chevrolet Cruze 2010 sedan, manual, 113CP 105633 miles

Hello,

My Lock Module does not work on both the key fob and inside the vehicle panel. When I press from outside on the unlock button on my key fob I can see the lights on, but the system does not unlock the car. I know that the anti-theft lock module is located behind the inside mirror. I don't know exactly what the root cause is: lock module or anything else? how can I test the lock module to know if it is working properly or not?

Many thanks,
Adrian

Yo_MaPrey from other 6 years ago

10 reports

Mikell74 from United States 2 years ago

Im having the same issue .

Comment

Driver side door has no power

Chevrolet Cruze 2011 Eco 194447 miles

Windows won't work from driver side window control. Dom light won't come on when the door opens. But the lock goes up and down on the door when the button his hit. Window and dom works with all other 4 doors

Cruzing from United States 2 years ago