Injectors replacement problems

Top problems

Failure indicator SolvedSolved

Toyota Hilux 2008  140000 miles
The car usually works normally but, occasionally, when realising the accelerator, a failure is indicated on the dashboard and the car remains at idle speed. What I have to do is to stop it and wait for a while, and it then starts working properly again. The nozzles and injectors filters were replaced, but the car is still the same way. I've just been told that the little engine from the turbo is not working and that it must be a wire that is failing. I've already been 20 times to three different mechanics, but no one has been able to solve my problem. Please help me.
libby from United States 9 years ago  
LI
3 reports 
Solved
Best answer (according to libby)
Junius from United States 8 years ago
With the the Hilux vehicles, it usually happens that some wires that lead to the injectors peel, causing that failure. I recommend you to check properly the wiring. Good luck.
M d success from Nigeria 2 years ago
Wire is the problem of the hilux
Saqi from Pakistan 2 years ago
Hello friends, I have Vigo 2005. There is a problem with it. When I drive it, it automatically leaves the accelerator on the way, it means the car stops and the engine light shows, then I turn off the key for 10 seconds, then back. It starts and it happens sometimes after 50 km and sometimes after 100 km and it happens every day. I have also changed the air filter sensor and starting cut and accelerator pedal but the problem is not solved. Please guide me. What's wrong with that? Thanks
Abubakar from Nigeria 2 years ago
I'm sure that is the problem of pulpom, wen you cross the the 100 km is going to heat temperature but still off your key up to 10 minute again going to do work, 🚔hello engineers 🇳🇬
Comment
Problems with a Hilux? Share them
Submit commentCancel
Submit replyCancel


Did you find the website helpful?

Thank you!