RisoltoPower loss
Ford Fiesta 2003 154000 km
Hi, my Fiesta does not start with the same strength it did some time ago. It only reaches 3000 rpm and, when I take a highway, it takes too long to speed up. Can anyone help me please? Or tell me what might be wrong with it. Thank you very much.
4 segnalazioni
1
Miglior risposta (secondo Faith)
TI
Do you have the engine Zetec 1.6? I have a Courier 2007 and it seems to be the same engine, as I've been having that problem since 2012. From my experience, I would recommend you to change the head gaskets and check the hoses one by one and, if in doubt, change them. You should as well check the deposit plug, the air conditioning connector and the distribution cap that is next to the engine. Finally check the thermostat as well. It is really important that you only use original parts to replace the ones you have, especially the antifreeze.
Vota utile
CE
Arabayı devirsiz kullanırsanız bu sorun oluyor. Aynısı bende de oldu. Bir Müddet 1. Veya 2. Viteste yüksek devirle kullanın arabayı. Biriken kurum atılsın. Araba rahatlar.
Vota utileProblemi correlati
The car does not start
Fiesta 2008 2.0The car does not start and does not take a start
Loss of acceleration
Fiesta 2014 Hatchback I have recently had a service but before then I was driving about 40mph and the car just wouldn’t accelerate it had power but wouldn’t accelerate now after the service it has done the same thing it wi…
Risolto
2 risposteEngine start
Fiesta 2009 The engine take about 5 minutes to start normally
Power loss when starting
Dakota 2004 When starting my car, there is a considerable power loss. When it reaches 3000 rpm, its normal strength comes back, but again, when reducing the speed to 2000 rpm, it weakens. It has been scanned and…
1 rispostapower loss
X3 2008 DieselWhen accelerating, the engine does not increase its revolutions, gaining strength for that reason.
1 rispostaPower loss when gearing
Santa Fe 2001 Hi, I have been having a problem with my jeep for a month. At the moment of gearing, it loses power notoriously and it is only after a while that it starts working properly back again. I have already…
Risolto1 risposta
Ti è stato utile?
Grazie!
