Stalls
Ford Mondeo 2003 170000 km
After a major repair, the car was left wonderful, with a good idle speed sound. But its problem now is that, when accelerating deeply, the heater failure indicator turns on and the car stalls. The scanner only detects that there is a lack of pressure in the gas-oil circuit.
1 réponse
CA
I have a Mondeotdci and the heator failure indicator turned on as well and the car stalled. The problem was the crankshaft sensor.
Voter utileProblèmes liés
Stalled and did not start
Mondeo 2002 Hi, I own a Ford Mondeo Ghia and it happened to me that it suddenly stalled and did not want to start working again. The car was towed to a mechanic, the fuel filter was replaced and the engine starte…
3 réponsesBrake failure
Mondeo 2001 Good afernoon, everyone. At low speeds, around 25-30 mph, I press the brake pedal deeply and the car does not stop. It is as if the brake was released and it takes too long to finally brake, scaring m…
1 réponseNoise when turning the steering wheel at low speeds
Mondeo 2002 After a bodywork and paint repair, the front left tire started making a strange noise when turning the steering wheel. The noise is even more clearly heard at low speeds; it is a cyclic and repetitive…
2 réponsesStalling while driving
F-150 2013 5.0Stall while driving with low oil pressure
Stalls
Pathfinder 2004 It has happened twice to me that when I accelerated my car deeply, it stalled. When I turn it on again, after 2 seconds it stalled once more. Even worse, when I finally worked out how to hold it turne…
1 réponseStalls when accelerating
406 2000 Hi, I have a 406 hdi 2.0 and, when accelerating, it stalls. The oil pressure indicator is turned on, but the oil is new. Even after I turn the engine off and start it again, the indicator remains turn…
1 réponse
Ça t'a été utile ?
Merci !
