I can drive 10 miles with no problems. All fluids good and no leaks. Thermostat new as well as oil. Battery from 2018 still holds charge and will start car but not until it sits for hr hrs for cooling down. Antifreeze not leaking and is only 3 yrs old from last flush. What electrical component causes this? Relay overheating or sensor? Please advise. Btw, antifreeze temps are stable at around 150-160 at idle. I've seen as high as 180 on the road.
The radio has no column to it when you turn it on and adjust it makes no difference with the sound very meak can not turn or adjust it to make it right.
Over some time my car windows have stopped working. But now my driver side window will not rise. Shortly after I got it in 2016, the drivers side front door wouldn't open from inside.
Cooling fan will not come on.30amp fuse was blown. Put in new fuse not working. Replaced fan relay. I don't get 12v, at fan fuse, with key off and engine hot. I only get 9v with key on.
Tengo una falla en el cilindro 1 ya cambié bobinas bujías inyectores compresión de motor está bien y también sale fallo con el sensor maf lo remplace pero no encuentro el fallo
Hola buenas tardes tengo un problema en mi Hhr 2006 lo que pasa que el tablero del kilometraje se vuelve loco sube y baja... Y eso hace que la transmisión no habiente los cambios... Bien y aparte eso hace que mi dirección se ponga dura... Alguien que aiga tenido ese problema que me de una solución
When we replaced the water pump the oxygen sensors were unplugged from the back of the motor. You can’t see back there. I need either wiring schematic for the oxygen sensors or a picture of the back of the motor. I thought it having trouble with that any help would
Buenos días le hice limpieza al cuerpo de aceleración al instante jalo muy bien pero o día siguiente empezó a fallar jaloneos y taponeo.2 conectores de los que van alas bobinas no traen sus seguros que puede ser la falla?se los agradecería bendiciones
So the climate control system relay is hot to touch after key turned into 1st. Also the engine fuse box housing ignition module n run/ start only gets power to one side of housing prong slot