Starting problems

Top problems

Cranking but not starting when hot SolvedSolved

Ford Ranger 2013 Ranger 3.2 233456 miles
First thing in the morning start with one kick , but if you drive about 7 km and it comes to temperature and you switch the engine off , she will not start again until cooled down
Green Monster from South Africa 3 years ago  
GR
Rank 5
27 reports 
Solved
Best answer (according to Green Monster)
Green Monster from South Africa 3 years ago
I took it to a very friendly Ford agency that informed me it is a common problem on the 3.2 , some shut off valve on the high pressure pump and replaced all injectors , the bleed-off on the injectors gone out of spec and not repairable.
Cooraz from Australia 3 years ago
It’s the cam sensor. Just replace it and all will be good. Only costs about $120 Australian. And 5 - 10 minutes time of your mechanic.
Gringo from Trinidad and Tobago 7 days ago
@CoorazDid that still no start
Comment

2017 FORD Ranger 3.2 diesel at times wont start

Ford Ranger 2017 Ford Ranger 21000 miles
Sometimes the truck can go for a week without a problem and then you try to start it and it clicks twice like a dead battery and other times it keeps cranking and I let go of the key and cranks until I turn the switch back to the off position. I wait about 3-5 minutes and it starts right up. I took it to the dealer and they cant find any error codes but I am the second owner and I saw a report that Ford changed the computer for the same reason so the first owner must have unloaded on me because no one can fix the problem.
chevy from United States 6 years ago  
CH
25 reports 
Harri from United Kingdom 6 years ago
Got same problem with 2013 XL seems starter was trying to earth thru 2mm wire lots of smoke after numerous attempts to start! Then 3 mins later starts first time. Local garage investigating Friday, will keep you posted.
chevy from United States 6 years ago
Thanks Ford tells me to bring the truck in when I have the problem but it never acts up when I take it to them. I saw on the internet some people with the same problem say to change the starter because when Ford checks the voltage it is ok but they claim their is some type of interference going from the starter to the crank sensor. Please let me how it works out for you. Ford change the computer and I still have the same problem. Thanks
Frank
Mad216 from United Kingdom 6 years ago
Ford have a software fix for this problem, I had it intermittent and the software upgrade fixed it. No problem since
Cinnymel from United States 2 years ago
@chevyI had same not cranking problem with my 2002 Ford Ranger xlt v6 3.0l truck. Battery, voltage regulator, and alternator all checked out good. I put a new battery in it then l put an ignition control coil module on it and solved cranking problems
Demons from Australia 6 years ago
I have the same problem with trying to start, I think there is a problem with the computer not recognising the key. Have had new keys still problem. I lift the bones and disconnect the earth lead from battery for 30sec then reconnect always starts. Ford do not want to know abou
Ford mechanic from United Kingdom 4 years ago
Check your foot brake pedal if it's hard and will not depress all the way it will not start take the hand brake off put it in neutral rock the vehicle until foot brake depresses put back in to park and it will start.
Local MECH from other 2 years ago
Any reason why the brake pedal hardens? I'm having similar issues.
Ford mechanic from United Kingdom 2 years ago
@Local MECHSorry late getting back to you, the hard brake pedal is telling you that it's registered that your transmission has not entered into parking mode correctly and will not allow you to start the vehicle.
Rossi from United Kingdom 2 years ago
@Ford mechanicWhat is the quick solution as it happened to me a couple of days ago. I kept moving the gear lever and eventually it did start but it was embarrassing as nobody could leave the car park.
Ford mechanic from United Kingdom 2 years ago
@RossiWhile your in the vehicle gentle push into park remove ignition key lock doors wait 5 to 10 seconds unlock doors as though your entering the vehicle then restart ,it should have reset.
Rossi from United Kingdom 2 years ago
@Ford mechanicCheers I will try that if it does it again 👍
Arvin from other 9 months ago
Having the same issue won’t start and break pedal won’t depress. Per mechanic no error on scanning but need to replace run/start relay, start relay and pcm relay…
Ford mechanic from United Kingdom 9 months ago
@ArvinThe error is the parking sensor, the ecu as not registered that the vehicle is in park mode, switching of and locking the doors for a couple of minutes resets the ecu.
sandgroper from Australia 3 years ago
I have exactly this problem. Brake is hard to press and steering locked. It will then not start though it turns over. I seem to just turn it on and off and put it in and out of park and release handbrake etc till finally it suddenly starts and is perfect for a week or two.
nsereko22@gmail.com from other a year ago
Mine is manual i was driving and the engine went off abruptly AND it refuses To start again
Distef from Australia 3 months ago
Same here wat was the problem
Jabu from South Africa a year ago
2.2 ford ranger 5 speed not starting it just cranking what could be a problem
Demons from Australia a year ago
I had a 2013 Ranger with the same problem and I took it to a dealer in WA 4 times and they could not find the problem. I rang ford and told me if I could take to we’re I bought the car which was in Swan Hill in Vic. I took it to them and they fixed in less than a hour and said if it played up again they told me what would need replacing but never had a problem since.
Weez from Australia 2 months ago
Hey mate, sooo what did they do in swan hill to rectify the problem ?
Comment

Car cranking but won't start

Ford Ranger 2015 Pickup ute 220000 miles
Cranking but won't start... changed fuel filter,air filter and cleaned up the fuel thank but still won't start...power train light is on
Iamo from other 5 years ago  
IA
36 reports 
Fred from Australia 5 years ago
Gday ive got a 2008 ford ranger deisel its been serviced by ford it cranks ovder but wont start any ideas
Amrish from other 3 years ago
I have the same problem with my Ford ranger 2015 3.2 5cilinder
Ben kgaphola from South Africa 2 years ago
I have a verry same problem please help
Weeksy from Australia 2 years ago
Same issue. Been back to ford twice but problem still there. Only happened since they put new motor in it.
Andre from other a year ago
I have a 2016 ford ranger 3.2 auto with tik tak noise or tapping noise from top cylinder,have changed injectors,Hydraulic lifters but noise is still on and engine list performance as well. Any advice please
Ivan from Australia 10 months ago
Im just selling my 3.2 2014 model same issue. Mine has been told failed injector leaking fuel and not allowing correct pressure to build aswell as high pressure fuel pump shit itself. ( guessing due to working overtime to make up pressure loss from dying injector). The ticking noise ontop of motor without hearing yours andre may have been the sound of injectors firing i had taken mine to mechanics 12 months ago regurding ticks ( when injectors were good) and was told the noise is normal but due to location of injectors directly ontop of engine they are more audible than other motors where injectors are on the side. *** not a mechanic. Just what i was told by going on 10 mechanics trting to find issue with my ute***
Comment

Wont start SolvedSolved

Ford Ranger 1995 Ford ranger 150000 miles
I have no spark and no fule presher
Robert from United States 7 years ago  
RO
4 reports 
Solved
Best answer (according to Robert)
Robert from United States 7 years ago
We thought it was fixed but she drove tt to work and it died on the way back home and now we cant get it started we have no spark and no fule preaher
Mayhem motors from Australia 7 years ago
Could be a fuse or electrical short normal if it has been off road you could of knocked a censer wire loose
Comment

Engine wont start

Ford Ranger 2016 Ford Ranger Wildtrak 3.2  35000 miles
Hey guys i have a problem with my 3.2 ford ranger wildtrak... after 3 days in garage the engine wont start... i thought it was the battery so i change the battery with a new one... but still it wont start... i describe it that the starter fails to continue to rotate and to start the engine... it rotates but it stops. Something is forcing the engine not to start... there are no indication lights on my dash board... do anyone have the same problem? my impression is the starter... any ideas?
G. R. from other 5 years ago  
G.
38 reports 
John from other 3 years ago
Same goes in ours may I know what fix your problem?
Nokesy from Australia 3 years ago
This is mine today, anyone know the issue?
Karl1975 from Australia 3 years ago
Hey mate, what did you find the problem was, mine has just started doing the same thing.
Luke from Australia 3 years ago
@Karl1975Did you find what it was I now have one doing the same thing
Karl1975 from Australia 3 years ago
@LukeHey mate it was a loose wire on the battery terminal, not the terminal itself but one of the wires that bolts to the terminal.
Cinnymel from United States 2 years ago
Yes. My 2002 Ford ranger xlt v6 3.0l truck wouldn't start. Installed new battery, even though battery, voltage regulator, alternator, starter all checked out good. I put a new Ford ignition starter coil pack module that goes where a distributor cap used to in older cars and it fixed problem so far. It was part of control computer chip.
Cinnymel from United States 2 years ago
Has anyone else experienced manual transmission problems. I have a 2002 Ford Ranger xlt v6 3.0l and have had the clutch and manual transmission fixed in October of 2020. $1600 at automotive shop which counted tge Emergency brake cable broke and rear disc drums replaced. Now, a year and a half later gears are sticking and doesn't want to go into gear.
Florida D from United States a year ago
The roll over switch Up under the passage side below the glove box
HENDO from New Zealand a year ago
Scan and clear all fault codes , should fix it.
Cooraz from Australia 2 months ago
Maybe need to reset the battery monitor sensor. In the new models there's a 'turn ignition/ press brake' - sequence... but I'm not sure how or if you can do it yourself in older models. Need a mechanic with a computer to hook up to it and reset the battery monitor sensor. Takes all of 10 seconds to do. Ask them how much for a call out to do it and haggle them with the leverage that it will only take them 10 seconds of they try charging anything too ridiculous.
Comment

Will not start when hot

Ford Ranger 2002 3.0L 77000 miles
I can start the truck without a problem, Drive it to the grocery store for example and when I come back out of the store to drive home, the truck will not start. I wait and wait for it to cool down, because that seems to make the difference. Finally call for a family member to take me home. Go back the next day, get in and it starts right up. I have been searching the internet and it appears this is a very common problem with Ford vehicles.
Is there some kind of heat sensor in the starting loop I can check?
Denny from United States 8 years ago  
DE
38 reports 
Mike s from United States 7 years ago
Cam sensor is possibly bad...had the same thing happen.
johnbosconkem@gmail.com from Nigeria 2 years ago
So changing the cam sensor is the solution.
TommyGunn99 from Australia 17 days ago
@johnbosconkem@gmail.comTried it didn’t work still have exact same problem.
I’ve changed the scv, fuel filter.
Mechanic says the pressure sensor is leaking or fuel rail quoted $1500 must be a cheap fix?
Dave from Australia 9 months ago
Having same issue change new sensor and it comes up with spanner and will go in to limp mode. Then put old sensor in no problem expect when it's hot it won't start. Is there a rest or way to tune the new sensor. 2017 2 .2 ranger 167km
Kevin from United States 8 months ago
Don't know if this is it, but the description sounded just like my 03 Ford ranger 2.2 and happened to have a friend come by the same evening it wouldn't start after going a quarter mile, and seen the catalytic converter glowing red, and it still wouldn't start only after it cooled down
Dave from Australia 8 months ago
Brought genuine senser from ford and it worked. Seems like the after market sensors are no good
Comment

Car Wont Start SolvedSolved

Ford Ranger 2016 Pickup,SA2K,T6 168000 miles
My ford Ranger had damaged pistons, so i ordered a new engine to replace the oldone. Once the new engine was fitted, i drove i for 3 days before it shutdown and wont start. It cranks.
Yohane from South Africa 3 years ago  
YO
1 report 
Solved
Best answer (according to Yohane)
Yohane from South Africa 3 years ago
We replaced the old Fuel Injectors and the car worked fine. I was told that if new injectors are fitted, the on board computer needs to be reprogrammed
Comment

Engine light on will not start

Ford Ranger 2011  250000 miles
Engine light came on engine started then shut off and will not start a will not start again
Roger from Australia 3 years ago  
RO
7 reports 
Roger from Australia 3 years ago
All, the engine light came on and the car slowed down, stopped on the side of the road, turned it off. Then turned the car back on and had a noise coming from under the bonnet, shut it off and now will not start. Anyone know of the main reason? anyone in Perth australia with a diagnostics computer to plug it in and see what is the problem. I asked 1 Ford dealer and told me to bring the car in, just need to know if anyone has or knows of anyone who would ahve the computer to plug it in and find the fault.
Andrew from Canada 3 years ago
On my 2009, 2.3 litre Ranger, all gauges have switched off except for fuel and the engine locks down as soon as it is turned off. Two garages have tried to find the problem but failed. In the past, it has occasionally happened while being driven but the engine has kept on going until it righted itself in a few minutes. Now, it is parked and the engine is locked (with only the fuel gauge working). Any ideas?
Comment

Not starting at all now

Ford Ranger 2012 2.2 diesel ford ranger  15000 miles
At first it had a hard starting for such a long time maybe for two weeks, but when you pull it or give at quick starting the engine run quick but when you try to run it using the key it won't start
Anaf from South Africa 3 years ago  
AN
3 reports 
chiripa from South Africa 3 years ago
Not starting it pushing smoke through inlet manifold, to the turbo pipe
Petrolhead from South Africa 7 months ago
I'm having the same issue,starts with quick start but doesn't without,I have changed injectors and coded them replaced the seal on the high pressure pump and still not starting just cranks and stops seems like a fuel or fuel pressure issue please assist
Comment

Wont start when hot

Ford Ranger 2017 2.2 DEISEL 106000 miles
After driving to warm the ute , she wont restart ,but , when it cools down !!!!!!she starts up no problem
Louie from Australia 2 years ago  
LO
10 reports 
Lenny from Australia 2 years ago
Louie did you find a resolution to your issue? Please share as we've spent weeks trying to resolve the same issue and nothing is working.
Besty from Australia 2 years ago
Hey mate I'm having the same issue with mine at the moment how did you go with yours did you work it out
Lenny from Australia 2 years ago
Hi Betsy, the crank angle sensor required replacement. Try to source an after market part as the genuine is ridiculously expensive.
Lenny from Australia 2 years ago
When cranking, If you hold the key in start position and vehicle stops cranking, (while key still turned in ingnitiin) then it’s the crank angle sensor.
Besty from Australia 2 years ago
@LennyJust replaced the crank angle sensor and that didn't help so God knows what's going on with it
Oswell from South Africa a year ago
@BestyHi Besty. Did you eventually manage to solve your issue? What was it?
Comment

Ford ranger 3.2 6 Speed wont start

Ford Ranger 2010 Picknup 150000 miles
I was driving my vehicle and it started stalling and hesitating to pick up and when I parked it, it started jerking while idling. Then I drove a short and it the engine just stopped running. I started again and it completely refused To start and it just kept cranking. After checking the intake pipe from engine into the fuel filter chamber, fuel was not flowing when I cranked the engine
Real from other 2 years ago  
RE
1 report 
Bigboi from New Zealand 2 years ago
It could be your cranking sensor causing this
Jay jay from other a year ago
My 2004 ford ranger will not accelerate pass 2000 rpms
Comment

At times engine cranks over but will not start up

Ford Ranger 2016 XLT 3.2 4wd ute 29000 miles
Random problem has happened about 8 times since new when hot or cold. Usually I lock and unlock car then retry starting again. Just guessing here but the delay of a few mins does let me start successfully. Any ideas?
Have taken to Ford for advise...?
Must be a common thing surely
Dougie from Australia 6 years ago  
DO
4 reports 
Dougie from Australia 6 years ago
Ford sorted this for me by replacing the crank angle sensor. They were very happy to help. Perfect now.
Comment

Dose not want to start in morning

Ford Ranger 2008 double cab ute 153000 miles
I have replaced glow plugs and still dont want to start in the mornings once going it will start and stop all day got me stuffed
glynn from New Zealand 8 years ago  
GL
9 reports 
Jeff from Australia 8 years ago
I have the same problem won't start first thing in the morning but once it's going it's ok for the rest of the day
I have changed the glow plugs , glow plug relay ,fuel filter,oil&filter air filter I was told about a cold start relay got idea where that sucker is when I do I will let ya know if that was my problem stupid car !!!
matt from Australia 8 years ago
Sell it if you can then buy a vw
Bt50dan from Australia 7 years ago
Pull out the injectors and give them a good clean. I had the same problem on one of my older cars
Tania,s truck from Australia 7 years ago
Make sure u have at least 10.5 volts to fuel pump solinoid if not trace back for possible bad earth on battery to chassis or all earth contacts broken or rubbed wires sorry for late reply folks just joined ,,,,,,,
Vince from Australia 6 years ago
Have the same problemonly morning will start only if I pull out the pollution lever out and have jumping leads on to give it power so it doesn't go flat.
gazza from Australia 7 years ago
My 2008 ford ranger wont start first thing in the morning. Once it dose start it will all day long and sometimes the next day. If i leave to late in the afternoon the next day it won,t.
Comment

Vehicle cranking but wont start

Ford Ranger 2006 Pick up 118000 miles
I have s ford ranger thunder 2.5 tdci, the engine wont start, the the key turns on and cranks but the engine wont start.
Kmmm from United Kingdom 3 years ago  
KM
6 reports 
T5snipper from South Africa 3 years ago
Same issue it won’t starr it just cranks as if the battery is empty.
Comment

Ford ranger 2.2tdci not starting after replacing turbocharger. I reset

Ford Ranger 2011 truck 350679 miles
After replacing the turbocharger, it cranks but not start. I reset timing but it just don't start. Timing is right but when turning the engine, it sounds as if the piston is hitting under the cylinder head, i fitted över size cylinder head gasket but it still don't start.
jack from South Africa 3 years ago  
JA
10 reports 
Banjo from South Africa 3 years ago
After replacing an engine (deasel) the vehicle cranks but won't start
Comment

Not starting when hot

Ford Ranger 2013 Dcab 2.2 T6 168023 miles
Ford ranger 2.2 2013 when hot not start replace crank sensor glow plug injectors replace harness check out same problem please help
Kobus from South Africa 3 years ago  
KO
12 reports 
power from South Africa 2 years ago
Same problem here did you get help
Yatesy from United Kingdom 10 months ago
I have the same issue. Starts when cold but not when hot. I have changed the crank sensor but no change. Can anyone help me out?
Merzdaman from other 9 months ago
I have this problem now... it's one kick start when cold... When hot its start but for 2secs... And its like miss fire
Comment

Truck will not start

Ford Ranger 2005 v6 190000 miles
Truck will turn over but will not start. It seem to have no spark. All lights on dash work fine. It ran well yesterday,sat over nite and will not start now.
doc. from United States 5 years ago  
DO
43 reports 
Jess from United States a year ago
2005 Ford Ranger XL 2.3L78,000mi
Jess from United States a year ago
My Ranger started doing exactly the same thing yesterday morning. I bought a new Motorcraft fuel filter today and plan to install this weekend.
Clow from United States 9 months ago
My 2005 has the same issue but no spark and no gas
Comment

It cranks but won't start

Ford Ranger 2014 Manual 400000 miles
My Ford ranger cranks but wont start what will be the problem
Leeroy from South Africa 2 years ago  
LE
7 reports 
Matt from United Kingdom 2 years ago
2016 3.2 Ranger will crank but cuts out after a few seconds - fuel pump ok though
Comment

Car cranks but won't start

Ford Ranger 2013  112130 miles
My ford ranger 2.2 won't start after major repair. The fuel pump in the tank runs non stop and also the starter will only crank for less than 5 seconds. I've noticed that the fuel pump only acts normal when I take out the pcm relay then I bought a new relay but it still doesn't act normal. Once the relay is fitted in the pump runs non stop until I turn the key to the off position.

The pump runs for more than a 2 minutes then finally switch off followed by a clicking sound in the pcm relay so I really don't know what to do from here
TeeKay from South Africa 2 years ago  
TE
24 reports 
Keido from other a year ago
Also mine with same problem whts the sorrution
Mike from Australia 6 months ago
2014 Ford Ranger 6spd auto, only 78000kms on it, everything was perfect untill one average road hill climb in dural, then it started missing, then it felt like someone turning off the ignigition momentarily, then only very lite acceleration was avail, then it died all together. Cranks & cranks with tank fuel pump working, but None of the fuel lines had any Diesel at the filter under the bonnet had when i disconnected them all. Not a drop coming out when cranking & or ignition only applied. ?
Comment

Engine cranks won't start

Ford Ranger 2016 Duel cab Disel 3.2 81000180000 miles
Engine will crank but won't start after finding one injector line weeping
Charly from Australia a year ago  
CH
1 report 
Bruce from United States a year ago
It sounds like the issue may be related to the fuel delivery system. The fact that you have found a fuel injector line that is weeping, or leaking, could be causing a lack of fuel reaching the engine, leading to it not starting. It's also possible that there could be an issue with the fuel pump or fuel pressure in the system. I would recommend having a mechanic diagnose the issue and determine the root cause. They will likely need to perform tests on the fuel delivery system, including checking the fuel pressure and flow, as well as testing the fuel injectors and pump to see if they are functioning properly. It may also be necessary to replace any faulty components in the system to get the engine running again.
Comment

Crank but wont start

Ford Ranger 2013 Double cap 2013 2.2 180000 miles
I have overhauled my engine and now it cranks but won't start can you help me
Vigaro from South Africa 2 years ago  
VI
4 reports 
Steve from other 2 years ago
M6 ford ranger WE engine wont start, what might the aproblem? I have changed all nozzles and still no hopes
Comment

My car is trying to start but it does not start

Ford Ranger 2012 Sensor  300500 miles
My car does not want to start but it promise to start ,if I start it just do the sound
tebogojosephmolatedi@gmail.com from South Africa 2 months ago  
TE

Turns over and but won't start

Ford Ranger 2015 Ute 130000 miles
2015 2.2l ford ranger has a new ERG valve and battery. It turns over but won't start.
Ranger from Australia 2 months ago  
RA
2 reports 

The engine cranks but won't start

Ford Ranger 2013 Pick up Qj2l  275691 miles
The engine cranks but won't start, it's a diesel engine
Mast from South Africa 3 months ago  
MA

The bakkie got stuck without diesel. I filled it but doesn't start

Ford Ranger 2015 T6 3.2 diesel 200000 miles
The bakie cranks but not start. I want to know how to get air out of the fuel system
Gertjie from South Africa 3 months ago  
GE

Strong smell gas will not start

Ford Ranger 2002 Ford ranger edge  125 miles
Truck has a strong smell of gasoline and will not start
Kandy from United States 4 months ago  
KA

Won't start after installing new batt

Ford Ranger 2008 4.0 engine xlt 2wheel drive 195000 miles
Remove batt from truck let stand for 6hrs installed new batt started right up then around lunch it wouldn't start so after 5hrs tried again no start held gas to the floor while turning starter let go of pedal and it started next morning no start again and no luck with holding gas to the floor fuel pump is running with plenty of pressure
Danger ranger from United States 4 months ago  
DA

Car won't turn over speedo stuck on

Ford Ranger 2010 3l 32000 miles
Car is not turning over speeder is stuck on
Charlie from Australia 6 months ago  
CH

Ute won't start or run.

Ford Ranger 2015 3.2 Ranger auto ute 96000 miles
Car drove home perfectly. Next morning tried to start and eventually did, but would not rev over 800 revs. In addition, huge cloud of white/grey smoke came from exhaust. Now it won't start at all. Didn't notice any lights on the instrument panel but didn't really look either.
Andy from Australia 9 months ago  
AN
5 reports 

Bakkie wont start

Ford Ranger 2008 3.0tdci ranger 270000 miles
Hi bakkie wont start, when its hot or cold. Push by hand starts immediately. Had problems with the injectors got that fix bakkie was running fine for 3 weeks, and then it started again. Did the pressure velve on the side of the motor but still the same. Can it be the pressure vavle on the injector railing or not?
Nico from South Africa 10 months ago  
NI
2 reports 

Cranking and wont start

Ford Ranger 2016 Double Cab 101200 miles
My Ford Ranger pick up double cab keeps on cranking but not starting. I changer air filter, oil filter and poured new oil, but unfortunately nothing works
1
Siya from South Africa a year ago  
SI

Won't start

Ford Ranger 2012 Ute 220000 miles
Started off wouldn't start hot now just won't start drained and cleaned tank changed filter getting fuel to filter ?
Jeffro from Australia a year ago  
JE
1 report 

Starter cranks but won't start. New Battery 2 months ago

Ford Ranger 2005 Ranger XL single cabin 79000 miles
Two days ago I backed the p/u in the garage, it was running fine. The next morning it cranked and cranked but wouldn't start. Never had this problem before.
Jess from United States a year ago  
JE
4 reports 

Cranks but wont start

Ford Ranger 2020 2.2 TDCI diesel 11 miles
Piston was replaced. Crank censor not touched. Injectors was marked before taken out and placed back presicely where they came out. Enjin cranks but wont start. New filters, oil ext. 116000km on engin.
Jora from South Africa a year ago  
JO

Engine cranks but will not start. White smoke from exhaust

Ford Ranger 2013 Ute 290000 miles
I noticed the idle hunting while stationary and decides to head home so i could inspect the issue. When i clutched in to come to a stop at an intetsection the ute stalled. Having not come to a complete stop i let the clutch out to roll start the ute and huge amounts of white smoke came from the exhaust and the ute would not start. *Engine cranks but will not fire,
*No DTC codes
*Replaced fuel filter
Mikejohnoh from New Zealand a year ago  
MI
6 reports 

Car Wont Start after Injection Pump and nozzle Service

Ford Ranger 2011 Double Cabin / WLAT1272647 Diesel 2500cc / XLT 2.5 145000 miles
Before the Service the car had power from 1-100/120 but after that I could not make it go as fast as 160-180. Then I contacted a mechanic and he opted we change all four nozzles and check the injection pump plus the turbo. The pump was measured and deemed to be working fine, the turbo was serviced and the nozzles changed. After that the car started but it lacked power and white/grey smoke was almost constantly coming out (which wasn’t the case before, there was smoke but not as much) on top of that problem after some settings and adjustments on the injector pump more power was on the car but n… Read complete
BeingSydney from other 2 years ago  
BE

Won't start after replacing MAF sensor and heater glow

Ford Ranger 2014 Ranger 97 miles
Won't be start after replacing MAF sensor and heater glow,it cranks but it won't start.
Rene from other 3 years ago  
RE
2 reports 

Won't start after replacing MAF sensor

Ford Ranger 2014 Ranger 97 miles
Won't start after replacing heater glow
Rene from other 3 years ago  
RE
2 reports 

Enjin won't start

Ford Ranger 2007 2.5 tdi 2000 miles
This morning waterpipe burst right after I switched of the enjin got back home replaced waterpipe now enjin cranks but won't start
1
2
Flip from South Africa 3 years ago  
FL
3 reports 

Engine won't crank

Ford Ranger 2019  9000 miles
Have a 1.5 year old 2.0 bitubo ranger. On hitting the push start button, engine won't not crank and dashboard icons lights will come on. However, trying again after a few minutes will always work. This phenomenon is intermittent and recurs once every 2 to 3 weeks. The service center had change out the starter relay, but the issue happened again after 8 weeks. I appreciate any suggestings on what could be the problem... As this had been dragging for the past months. So far, Ford warranty center could not solve my problem. Thanks
NicTeng from other 3 years ago  
NI
7 reports 


Problems with a Ranger? Share them
Submit commentCancel
Submit replyCancel


Did you find the website helpful?

Thank you!